Products
Neo-Aerodynamic Ltd Company
Currently; Our projections are:
Residential Aero Electric Unit (Wind Turbine)
- Available: NOW
- Kits: $5450.00*
- Turn Key System:
$6750.00*
- Wing: $250.00
- Central vane $50
- Stand alone Super Structure: 12'-
$850.00 24'-$1800.00 **
- Shaft: $600.00
- Arms: $60.00
- Generator + bridge:
$1700.00
- Generator RPM controller:$2200.00
- 10% discount for registered environmental advocate.
- Lease; payment based KWH it generates; (restrictions applied).
- At-cost for evaluation unit (restrictions applied).
- Religious community "at cost" (restrictions).
- Datasheet
Mid Size Utility Scaled Hydro Electric Unit
- Available: TBA but very soon (2010?)
- Datasheet
- Time to installation: 3 days
- Projected capacity: 1MW
- Projected options: To ensure your success you can rent, lease or purchase
RPM Independent Induction generator.
- Available: NOW
- Running any 480V 3 phase
induction
motor as single phase RPM independent generator up to 7HP. This can be
wire as 1200 or 3600 single phase, synchronous RPM.
- Optimum generating range from 5 to 10% of the synchronous RPM.
- Optional controller to turn ON/OFF at specific speed.
- Optional Smart controller
- Projected options: To ensure your success you can rent, lease or purchase
- Three Phase system - Call
- Renewable energy device may suddenly increase or decrease its
torque resulting electrical spikes. The main cause to make the
electronic components unstable and the fuse blown. Therefore the bridge
needs to be tailored for each line of product and/or the line of
selected induction generator.
- Operational restrictions:
- A cool down of at least 5 minute needed counted from the last
last time the power turned on.
- The induction motor are designed to operate at high speed, therefore its built in fan is ineffective to dissipate the heat; an additional fan should be in-placed. If one selects to use for wind turbine (of any kind) then additional measures need to employ to take advantage of the wind to cool the system.
- Even though the faster the generator turn the more power it
generate; however it should not pass 5% of its synchronous RPM. Over
the 25% of the synchronous RPM the output starts to decrease.
- Unlike hi-speed induction generator which achieve it named plate output at about 7% of the RPM; the RIIG could achieve twice of that output at 7% of the synchronous RPM. The reason is that during a cycle the hi-speed induction generator steadily change its state from motor to generator specially when the electric switches sign.
- Theoretically 220/240V single phase motor works; however when
it operates as generator the the pole to pole voltage go much over that
tolerant allowed of its internal copper.
** Unless one choose the high superstructure. other measure should be added to prevent injury or even death to passing-by human specially children and/or animal at the same time they do not cause wind blockage(s).
l